Position Summary
The Quality Technician I. supports the quality system by performing product audits, process audits, gauge studies, problem solving techniques, product disposition and other analytical methods applicable to related requirements and specifications to maintain product quality. This position is based out of our Hiawatha, IA facility and on our second shift.
Responsibilities
- Coordinate ISO Internal Audits Procedures and Process Audits.
- Update ISO procedures, work instructions and standard works with direction from QA Engineer / Manager.
- May initiate appropriate corrective action to resolve quality problems, of internal or external sources, with direction from QA Engineer / Manager
- Setup, maintain and report on SPC programs.
- Maintain calibration records and service/control gage inventory.
- Design Gage R&R and conduct analysis
- Good written and verbal communication skills with ability to present in front of various group sizes and back grounds.
- Coordinate PPAP completion
- Conduct process capability studies and analyze results.
- Assist in ISO Internal Audits Procedures and Process Audit.
- Audit processes and work areas for conformance to appropriate instructions, materials, and identification.
- Operate electronic data collecting equipment along with a network-based computer system.
- Verify accuracy of gages and measuring instruments, such as calipers, plug gages, dial indicators, and pressure gages using master gages and standards.
- Accurately read gages, prints, part identification, specifications, and procedures.
- Actively participate in Parker’s “Lean” initiatives.
- Ability to work all shifts and work overtime as necessary
- Assist with data and product/process information and analysis.
- Assist with PPAP data collection and documentation
- Perform line inspections when necessary
- Maintain departmental records.
- Document nonconforming goods through internal quality system and communicate the non-conformances to the appropriate party.
- Assist in PFMEAs, control plans and process improvements.
- Perform standard test and/or preliminary evaluation programs for product compliance as well as root cause analysis on samples of routine products and defective product.
- Perform product inspection and testing as required per appropriate specification or standard.
- Conduct process capability studies
- Obtain, evaluate, and document testing requirements on designated raw materials and finished goods.
- Perform Receiving Audits in accordance with applicable procedures, standards and instructions
- Generate inspection reports, make dispositions, and maintain database.
- Perform containment procedures and maintain hold area.
- Attend special training classes as necessary to maintain certifications and improve skill sets
- Train others in Quality related skills and procedures.
- Work safely in accordance with regulations, standards, and procedures in a manner that eliminates risk to health and the environment. Notify leadership of unsafe conditions or practices unlawful activities and activities which present unreasonable health and/or environmental risk. Report all safety and/or environmental incidents to leadership immediately.
- Participate in peer-based teams (i.e., Natural High-Performance Teams), and work with groups to initiate and implement programs such as Lean Manufacturing and 5-S.
ORGANIZATIONAL RELATIONSHIPS/ SCOPE:
Qualifications
Education required: | Completed 2 or 4 year program at college, trade school, or vocation tech program APQP Training (recommended) ASQC Certification (recommended )
|
Experience: | - Experience or familiarity with production process
|
Preferred Skills/ Qualifications: | - Two (2) years’ experience in quality or inspection
Good verbal and interpersonal communication skills Basic knowledge and use of hand tools Sound decision making skills Good math, reading, writing skills Demonstrated mechanical aptitude Mental and visual acuity for production of quality product Strong troubleshooting skills
|
Skills/ Competencies: | - Basic computer skills – Microsoft Office package, Minitab, QSI programs
- Able to demonstrate 12th grade equivalence in math and reading comprehension.
|
Other Skills: | Positive attitude and ability to work well in a team environment |
Assessment: | Employee must pass pre-employment screening |
Conditions of Employment
Physical Conditions:
Work Requirements | | None at all | Occasional | Frequent | Continuous |
of Workday (8 hr) | 0 | 1-33 | 34-66 | 67-100 |
Repetitions per hour | | 4-6 | 6-12 | >12 |
Lift / Carry | ☐ | ☒ | ☐ | ☐ |
Up to 10 lbs. | ☐ | ☒ | ☐ | ☐ |
11-20 lbs. | ☐ | ☒ | ☐ | ☐ |
21-30 lbs. | ☐ | ☒ | ☐ | ☐ |
31-100 lbs. | ☐ | ☒ | ☐ | ☐ |
Bending | ☐ | ☒ | ☐ | ☐ |
Twist / turn | ☐ | ☒ | ☐ | ☐ |
Reach below knee | ☐ | ☒ | ☐ | ☐ |
Push / pull | ☐ | ☒ | ☐ | ☐ |
Squat / kneel | ☐ | ☒ | ☐ | ☐ |
Stand / walk | ☐ | ☒ | ☐ | ☐ |
Sit | ☐ | ☐ | ☒ | ☐ |
No lifting above shoulders | ☐ | ☒ | ☐ | ☐ |
WORKING CONDITIONS:
The employee may be subject to:
Work in areas where safety equipment will be required (steel toe shoes, eye protection, hearing protection)
Standing is required for extended periods of time. Walking, pushing, pulling, reaching, bending, turning, twisting, squatting, and lifting is performed on a regular basis
Requires high degree of manual dexterity, which could be performed under restrictive conditions
Requires flexible hours and short notice for overtime
The employee may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws.
Equal Employment Opportunity
Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations.(“Minority / Female / Disability / Veteran / VEVRAA Federal Contractor”)
If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Know Your Rights: Workplace Discrimination is Illegal (eeoc.gov) and Genetic Information Discrimination
Drug Tests
Drug-Free WorkplaceIn accordance with Parker’s policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment.
